Knowledgebase: Servers > JSCAPE MFT Server
Unable to connect to administrative service
Posted by Van Glass, Last modified by Van Glass on 04 January 2011 03:43 PM
If you are unable to connect to the administrative service for JSCAPE MFT Server the causes are as follows:

1. Service is not running. Check that the service is running on the expected IP/port.

2. Firewall is blocking incoming connections. Check that firewall is not blocking incoming connections to administrative service.

3. Client IP has been blocked. If you fail authentication with administrative service too many times in a short period your client IP can be blocked. These settings are controlled under the File > Settings > Manager Service > Security panel of JSCAPE MFT Server Manager. To reset these options outside of JSCAPE MFT Server Manager perform the following:

a. Shutdown administrative service for JSCAPE MFT Server.

b. Delete the security.dat file located in the installation directory of JSCAPE MFT Server. This will delete any blocked client IP's from the list and reset to default settings.

c. Restart administrative service.

d. Attempt to reconnect using JSCAPE MFT Server Manager.
(119 vote(s))
This article was helpful
This article was not helpful

Comments (0)
Post a new comment
Full Name:
CAPTCHA Verification 
Please enter the text you see in the image into the textbox below. This is required to prevent automated registrations and form submissions.

Help Desk Software by Kayako